OMS SpA – COMMUNICATION ABOUT COVID-19 EMERGENCY
Paruzzaro, March 30th, 2020
To all our valuable Customers and Supplier
OMS Spa is pleased to inform all our Customers, Partners and Suppliers that our Company has been included in the List of Strategic Companies revised by the Italian Government on March 25th 2020.
Starting from Monday March 30th, our Paruzzaro Plant will be back to work, operating to the best of our abilities – given the current conditions – in full respect of the indication of our Ministry of Health.
– Offices personnel will still be operating from home in Smart Working mode;
– All customers waiting for our service engineers will be contacted in order to get an official confirmation that our technicians can travel to destination and access the sites.
We are asking your understanding in advance shall we will not be able to accomplish or delay some of our commitments due to Force Majeure.
Certain in your understanding and thanking you in advance for your kind collaboration.
Officina Meccanica Sestese SpA
LOGIMAT 2020 – STUTTGART
In compliance with the provisions regarding the Coronavirus emergency, set forth by the local authorities, and in order to prevent its spread, we have decide to cancel our participation in the event.
Responsibility towards our collaborators, customers and visitors comes first.
This decision was difficult to take, but we look forward to seeing you at LOGIMAT 2021 with renewed enthusiasm.
More details: LOGIMAT2020
ECOMONDO 2019 – Rimini
From the recovery of materials and energy to sustainable development. All sectors of the circular economy on a single platform.
The benchmark event in Europe for technological and industrial innovation. An international event with an innovative format that brings together all sectors of the circular economy on a single platform: from the recovery of materials and energy to sustainable development.
The event helps companies become world leaders in innovation, promoting the development of an innovative and sustainable entrepreneurial ecosystem.
ECOMONDO supports the companies to make contact with the most skilled national and international buyers and work all year with a targeted community with the leading experts in the circular economy.
The OMS group will participate for the first time presenting a strapping kit suitable to meet the needs of the waste sector. Don’t miss this appointment!
Between 5 and 8 Nov, 2019 our Sales staff, will be happy to welcome you at Hall A3 – booth 181
More details: https://www.en.ecomondo.com/
PRESS MASTER PLUS ON STAGE
HIGHEST PERFORMANCE meets LOWEST PRODUCTION COSTS
OMS Group was on stage at the FEFCO Technical Seminar in Geneva with their new Generation of an modular intelligent High Speed Pallet Strapping Press for an INDUSTRY 4.0 automation.
The Fully Automatic High Performance System PRESS MASTER PLUS are equipped with an,
- Intelligent Compression Speed
- Intelligent Compression Force
- Intelligent Compression Height
- Intelligent Ultra Sonic Sealing Head SONIC Plus
to optimize your Packing Result & Reducing your Costs.
We manage with our new “OMS Intelligent COMPRESSION Control”
of the load with the result that you will get the Highest Load Securement & optimized Load Height.
Our First 70th years
This year, OMS celebrate its 70th year of foundation with a series of events specifically thought of for this important moment.
OMS Group is a world leader for end-of-line packaging of palletized products for all market sectors. In addition to the Italian headquarter the Group consists in 11 subsidiaries based in Italy, Europe, North and South America, Asia and Oceania.
LIGNA 2019 – Hannover
LIGNA is the world’s leading trade fair for machinery, plant and tools for the woodworking and timber processing industry. The show will have a strong focus on the role of automation and digitization in combining the customer-centricity of product individualization with the economies of scale of large-series production. Apart from digitization, the main drivers of this boom for wood-industry technology suppliers are the worldwide megatrends of sustainable building and urbanization.
OMS Group is participating in this edition, presenting a packaging machine suitable for satisfying the multiple needs of the wood sector. You can’t miss this appointment!
Between 27 and 31 May, 2019 our Sales staff, will be happy to welcome you at Hall 26 – stand E08
More details: https://www.ligna.de/home
BAUMA 2019 – Munich
BAUMA is more than the world’s leading trade fair: it is the heartbeat of the industry. It sets the pace. Dynamizes the market. And drives business. With one paramount goal: to always already focus on the next challenge. Because it’s not just about the status quo, but about the future.
Because it’s not just about individual perspectives, but about the big picture: the construction, building material, mining machine industry, all related accessories in its full dimension.
OMS Group is participating in this edition, presenting a packaging line suitable for satisfying the multiple needs of the sector. You can’t miss this appointment!
Between 08 and 14 April, 2019 our Sales staff, will be happy to welcome you at Hall C1 – stand 238
More details: https://www.bauma.de/index-2.html
CCE 2019 – Munich
CCE International it has firmly established itself as a specialized European meeting point for this industry.
This fair is focusses solely on manufacturing and converting corrugated and cartonboard.
CCE International is a unique platform to present our most up-to-date machines and technologies to a specialized public who intends to improve their production processes and find practical solutions to implement new product ideas.
OMS Group will participate in this edition, presenting important news! You cannot miss this appointment.
Between 12 and 14 March 2019, our Sales staff, will be happy to welcome you at Hall 6 – stand 810
More details: http://www.cce-international.com/2019/english/
SONIC Plus – Ultra Sonic Sealing Technology
The SONIC Plus model strapping head, with its innovative Ultra Sonic Sealing Technology, represents the state-of-the-art in the field of strapping heads.
Thanks to its compact size and reduced weight, the new ultrasonic head is easy to move for maintenance and replacement. No waste of time during these operations.
LOGIMAT 2019 – STUTTGART
A top event for in-company material flow and computer-controlled processes from procurement to production and distribution…in the heart of Europe.
LogiMAT, the International Trade Fair for Intralogistics Solutions and Process Management, sets new standards as the biggest annual intralogistics exhibition in Europe. This is the leading international trade fair that provides a comprehensive market overview and competent knowledge-transfer.
OMS Group will participate for the first time in this important event, with an automated line solution, with a 4.0 perspective, interconnected and integrated with the factory’s IT and logistics system and intelligent production assistant robots in collaboration with SEW-EURODRIVE (www.sew-eurodrive.it), one of our most important partners and suppliers..
Between 19 and 21 February 2019, our Sales staff, will be happy to welcome you at Hall Nr.4 – booth A45
More details: https://www.logimat-messe.de/en
AVR900 + ADV system
AVR900 is an automatic rotating ring wrapping machine.
Is it suitable for all applications where high production rates are required especially in the beverage sector so it can be easily inserted into packaging lines.
The rotating ring designed without sliding electrical contacts guarantees: less maintenance, reduced electrical consumption, drastic reduction of overheating and risks of electric shock consequently a greater overall safety of the machine.
This model can be equipped with one or two pre-stretch reels of film and allows the wrapping cycle to be started and stopped at any palletized load height. Rotation takes place by means of a high-strength belt whose speed is adjustable directly from the operator panel.
At the end of cycle the film is not heat-sealed (thus avoiding emission of harmful fumes) but through a system patented by “OMS” where the queue of film is positioned under the previous wrap to ensure a perfect finish.
Another system developed and patented is the pre-stretching carriage: it guarantees a stretching ratio of film up to 300%, without the use of additional motor or electrical contacts.
This results in greater reliability of packaging, load stability, reduced film consumption and maintenance.
AVR900 can be equipped with top-sheet device which allows the wrap of pallet dust or water proof ensuring a complete packaging on five sides.
OMS has also developed a fundamental and useful accessory for all companies wishing to put their brand on the packaged product; this option is integrated into a special reel holder unit where roll of advertising band is positioned. Results a saving of time for the application and protection of its own brand within the same packaging.
The advertising band can be applied at any point of the packaging thanks to a special ring vertical reading system, programmable according to required height.
The core of the palletless system of OMS is the SEW-Eurodrive technology, a German multinational, one of the world leaders in industrial automation. Many of the components installed in the WHO machines are supplied by the company born in northern Germany more than eighty-five years ago.
This technology is for example present in the palletless lines of OMS. These are modular and adaptable packaging plants, capable of producing stable packaging without the support of the wooden pallet without doubt one the major cost of the packing.
The constant partnership that unites OMS and SEW offers the possibility to develop end-of-line packaging solutions that are extremely effective and innovative thanks to the adoption of cutting-edge components. The SEW parts used have a key role both in the packaging phase and in the handling phase, guaranteeing high productivity cycles.
Regarding the first phase, the line uses DRL asynchronous servo geared motors controlled by MOVIDRIVE technology that allow to contain typologies and costs while guaranteeing performances similar to those of servo motors.
Instead, movement is carried out by means of motorized roller conveyors and involves the use of gear motor with decentralized MOVIMOT technology, which make it possible to drastically reduce the start-up and wiring times and the size reduction of the electrical panels.
The communication of the pallet line less OMS is managed using an Ethernet bus directly integrated on the components used; this allows a rapid data transmission, a simplified wiring and a the possibility to analyze the operating data remotely.
The reliability and the experience of SEW components, expressly requested for palletsless plants always operating in extreme conditions (high temperatures, highly dusty, humidity and relative condensation cause high temperature changes), have played a decisive role in the selection as supplier of OMS, thanks to ad hoc application packages, especially in the application field of packaging.
41° ASEAN GLASS CONFERENCE
OMS Italy and OMS Singapore were one of the official sponsors at the 41° Asean Glass Conference held from the 9th to the 12th of October 2017 at Da Nang (Vietnam).
This occasion represented a moment in which different cultures met and it has been a great opportunity to share new ideas, toughts and solutions concerning the glass sector in particular. “Glass Digital Era”was indeed the subject of the event.
As reported in an article pubblished on the Glass World Wide magazine: “South East Asia has emerged as a major powerhouse for glass tableware production in recent decades. The development of a sizeable, local middle class and rising purchasing power have been pivotal, in addition to which, the region has become an important exporter to Europe, the Americas and the rest of Asia.”
OMS was glad to take part at this conference, first of all because of the opportunity to become aware of the new challenges in the glass sector and also to improve its technological skills concerning the glass market in the digital era.
AN OMS IN NORTHERN AFRICA
Tunisia, Morocco and Algeria are part of the so called Maghreb region situated in northern Africa. Usually considered difficult and uncharted lands they are however full of magical landscapes and great economic opportunities.
These Countries are now beginning to grow in the world market and to make use of the occidental technologies and opportunities.
The Oms Maghreb headquarter in Tunis has been inaugurated the 17th March 2014, this city with its charme represents a perfect point of connection to manage the ever- growing request of the african market.
NEW HEADQUARTER OF OMS ESPAÑA
We are pleased to introduce the renovated headquarter of OMS España.
The new offices are in Castellón in the autonomous community of Valencia, only 4 kilometers far from the trading port of Marina Real Juan Carlos I, the perfect reference point to give a prompt feedback to our customers in southern Spain.
FIRST PACKAGING LINE WITH FOUR SX 600 STRAPPING HEADS IN THE U.S.A.
The SX 600 model strapping head, with its innovative ultrasonic welding system, represent the state-of-the-art in the field of strapping heads.
Thanks to its compact size and reduced weight, the new ultrasonic head is easy to move and to pick-up. No waste of time during head replacement.
Ultrasonic sealing technology
Reduced overall dimensions
Minimum down time
Eay strap feeding
Easy to move thank to reduced weight
Reliable seals on PP or PET
Only 20 Kg
20th ANNIVERSARY OF OMS SINGAPORE
Singapore is considered the “east Switzerland” thanks to its city organization preciseness and to its perfect cohabitation of the opposite in fact the most modern skyscrapers are opposite to the most ancient colonial buildings.
In the heart of this contrasting scenery, Officina Meccanica Sestese has built in 1997 one of its operating centre in the middle of the Asian island. It’s coordinated by Mr. Peter Tan, managing director and shareholder, who has been able to improve himself year by year.
The hard work and the good strategies brought OMS Singapore to be the leader in the Asia packaging market.
LIGNA features technology for the entire wood value chain – from harvesting machinery to industrial processing and production plant and equipment.
LIGNA stands out from competing shows in that it attracts an international audience of top-level decision makers and professionals from all key sectors of the wood industry.
CCE INTERNATIONAL 2017
CCE INTERNATIONAL 2017
Munich Trade Fair Centre – Germany
Pavilion B6 Stand 517
FRUIT LOGISTICA 2017
Some pictures of our stand at Fruit Logistica, Berlin.
We presented some new packaging solutions in the fruit and vegetable sector.
AUSTRALASIA, THE LAST BORN AMONG THE OMS COMPANIES
Why “OMS Australasia”? Well, “Australasia” covers a region within Oceania, which includes Australia, New Zealand and neighbouring islands in the Pacific Ocean. So, it is fitting that we chose this name for our new headquarters based in Australia.
Located in the South East of Melbourne, Victoria, our new warehouse will allow us to provide our customers with high quality stand-alone and integrated end-of-line packaging systems and solutions, backed up by exceptional after sales service and support.